https://ez.analog.com/microcontroller-no-os-drivers/f/q-a/566562/adrv9002-and-zcu102-no-os-firmware/484120
ADRV9002 and ZCU102 no-OS firmware - Q&A - Microcontroller no-OS Drivers - EngineerZone
Hi all, I have just started the ADRV2002 board C) with ZCU102, no-OS firmware. Is there any method to change the frequency of the PLL from the Analog IIO
q aos
https://ez.analog.com/microcontroller-no-os-drivers/f/q-a/582510/adrv9002-zcu102-calibration-error/527762
ADRV9002 ZCU102 Calibration Error - Q&A - Microcontroller no-OS Drivers - EngineerZone
Hi Team, I'm using hdl_2022_r2 and no_OS_2022_r2 for ZCU102_ADRV9002 project creation. At the time of initialization, I am getting calibration error. I'm using...
q acalibrationerror
https://ez.analog.com/microcontroller-no-os-drivers/f/q-a/578040/adrv9002-calibration-error/518768
ADRV9002 CALIBRATION ERROR - Q&A - Microcontroller no-OS Drivers - EngineerZone
Hi, I am using adrv9002 with NOOS version 2021_R1, I am getting CALIBRATION ERROR [ERROR]: Error number 3 (0x00000003), Recovery action -101.In file ../src/noos
q acalibrationerrormicrocontrolleros
https://ez.analog.com/linux-software-drivers/f/q-a/579545/adrv9002-mcs-setting-on-the-iio-oscilloscope/532337
ADRV9002: MCS setting on the IIO oscilloscope - Q&A - Linux Software Drivers - EngineerZone
I am testing MCS with EVAL-ADRV9002 and ZCU102. UG-1828 has the following description and I figured that even with one ADRV9002 I would need to use MCS to phase
https://ez.analog.com/linux-software-drivers/f/q-a/563234/adrv9002-kernel-module-support/475157
ADRV9002 Kernel Module Support - Q&A - Linux Software Drivers - EngineerZone
We're using the Petalinux build of the 2021_R1 branch, and we're about to switch away from our ZCU102 and transceiver devkits to actual hardware. With the way...
q alinux softwarekernelmodulesupport