https://reprap.org/forum/read.php?263,134103,printview,page=1
After running a J-head for a while and helping many people get started (here and in our local R.U.G.) Myself and others have come to a realization that the...
jheadhotends
https://reprap.org/forum/read.php?1,787886,790723
Hi! I plan to use a Diamond hotend (3 or 5 colors) in Lite6 config. I'm wondering: are 3 (5) heatsinks really needed ? As PTFE tubing goes to the Diamond, what...
diamondhotendsheatsink
https://reprap.org/forum/read.php?1,314104,printview,page=2
Hi all, I just wanted to relate my experience with these hot ends in case others run into the same things. I got a Prusa I3xl kit from diytechshop back in Nov....
diy techshopdefectivehotends
https://reprap.org/forum/read.php?14,825610
Hallo zusammen, Ich bin neu hier im Forum und gerade dabei einen i prusa zusammen zu bauen und bin bei Grundeinstellungen der hard und software hier slelt sich...
zweihotendshardwareundmarlin
https://reprap.org/forum/read.php?263,134103,page=3
After running a J-head for a while and helping many people get started (here and in our local R.U.G.) Myself and others have come to a realization that the...
jheadhotends