linuxcnc - Robuta Search

https://forum.linuxcnc.org/9-installing-linuxcnc/30178-ubuntu-14-04-and-linuxcnc-2-7-3 Ubuntu 14.04 and LinuxCNC 2.7.3 - LinuxCNC Jan 8, 2016 - Dear Masters, I am beginner Linux User, but I never give up now, because I learned a lot some days ago. But I am must working, and I haven't lot of time, so... ubuntu linuxcnc https://psha.org.ru/irc/%23emc-devel/2013-06-30.html #linuxcnc-devel | Logs for 2013-06-30 linuxcnc devel logs https://www.forum.linuxcnc.org/38-general-linuxcnc-questions/56402-tool-touch-with-prox Tool Touch With Prox? - LinuxCNC Jun 17, 2025 - I'm working at designing a small CNC machine for milling lock set mortises and would like to incorporate automatic tool length detection. I was wondering if... tool touch prox linuxcnc https://forum.linuxcnc.org/ethercat/53274-linuxcnc-and-beckhoff-ax5000-servo-drives?start=10 LinuxCNC and Beckhoff AX5000 servo drives - Page 2 - LinuxCNC Jul 18, 2024 - Hello members, has anyone gotten the AX5000 drives working correctly with Linuxcnc? Thinking of a new machine retrofit and I think these would work with old... servo drives linuxcnc beckhoff https://forum.linuxcnc.org/27-driver-boards/44422-colorcnc-colorlight-5a-75e-5a-75b-as-fpga-controller-board?start=230 ColorCNC Colorlight 5A-75E/5A-75B as FPGA controller board - Page 24 - LinuxCNC Dec 2, 2021 - This is the topic to discuss my contribution into Linuxcnc. The project is named "ColorCNC" because it's a firmware driver for Chinese board Colorlight... https://forum.linuxcnc.org/qtvcp/40981-estop-button-behavior?start=10 ESTOP button behavior - Page 2 - LinuxCNC Dec 29, 2020 - More questions as a result of QTPlasmaC testing: With regard to the ESTOP button (which I understand to be one of the existing LCNC widgets), the current... button behavior linuxcnc https://www.forum.linuxcnc.org/9-installing-linuxcnc/53163-new-and-working-rtai-debs-for-2-9?start=110 New and Working RTAI debs for 2.9 - Page 12 - LinuxCNC Jul 7, 2024 - onelaboratories.us/rtai_lcnc/ 5.4.258 matching RTAI kernel and LCNC debs onelaboratories.us/abc/ 5.4.279 matching RTAI kernel and LCNC... new working rtai debs https://forum.linuxcnc.org/12-milling/51066-suitable-encoder-upgrade-options?start=0 Suitable encoder upgrade options - LinuxCNC Dec 20, 2023 - I'm in the process of CNC converting my Optimum MH50V milling machine () and as a part of that process I'd like to upgrade the encoder on the machine so that... upgrade options suitable encoder linuxcnc https://www.forum.linuxcnc.org/ethercat/51661-how-to-monitor-op-mode-in-panasonic-a6b-ethercat?start=0 How to monitor OP mode in Panasonic A6B Ethercat - LinuxCNC Feb 11, 2024 - Dear all, Is there any method to monitor OP state of driver?? Many times some drives not coming in OP mode and also many times not coming Servo Lock. And... how to monitor op mode panasonic https://psha.org.ru/irc/%23emc-devel/2014-06-01.html #linuxcnc-devel | Logs for 2014-06-01 linuxcnc devel logs https://www.forum.linuxcnc.org/ Index - LinuxCNC index linuxcnc https://forum.linuxcnc.org/10-advanced-configuration/32367-servo-wiring-and-tuning-detailed-how-to-example-mesa-7i77?start=50 Servo Wiring and Tuning detailed How To example Mesa 7i77. - Page 6 - LinuxCNC Feb 19, 2017 - Servo tuning how to: : I am fully aware that i am not good at explaining things, all the work i have done on this forum has been and still is my way of... https://forum.linuxcnc.org/31-cad-cam/33370-linuxcnc-stopping-freezes-at-g1-code-but-g1-works-via-mdi LinuxCNC stopping/freezes at G1 code but G1 works via MDI - LinuxCNC Oct 1, 2017 - I'm trying to setup a Sherline Mill using LinuxCNC and I have a pretty simple program that should work but everytime I run it, it hits the G1 code and just... linuxcnc stopping freezes code works https://www.thermik-board.de/viewtopic.php?t=1892&sid=b9c97bd5d479f9eece89173b796035fd Neue Steuerung, neues Projekt... (LinuxCNC/Mesa7I76E) - thermik-board.de neues projekt steuerung linuxcnc board de https://forum.linuxcnc.org/qtpyvcp/52377-add-setting-to-toggle-display-of-one-or-two-file-managers-in-probe-basic?start=0 Add setting to toggle display of one or two file managers in Probe Basic - LinuxCNC Apr 17, 2024 - I recently came across this video on YouTube where author has modified the ProbeBasic UI to hide one of the two file managers.... https://www.forum.linuxcnc.org/12-milling/44963-retrofitting-5-axis-willemin-w400-with-linuxcnc?start=10 Retrofitting 5 axis Willemin W400 with LinuxCNC - Page 2 - LinuxCNC Jan 29, 2022 - Greetings! My first post here... So quite some time ago I bought this: It came with full documentation. This machine was renovated by Willemin to like new... retrofitting axis linuxcnc https://forum.linuxcnc.org/gmoccapy/26314-gmoccapy-a-new-screen-for-linuxcnc?start=120 Gmoccapy - A new screen for linuxcnc - Page 13 - LinuxCNC Mar 21, 2013 - I just pushed Norbert's Gmoccapy to master. It's very different from linuxcnc's other screens - check it out. There are sample configs under the sim/gmoccapy... a new screen linuxcnc https://psha.org.ru/irc/%23emc-devel/2013-03-05.html #linuxcnc-devel | Logs for 2013-03-05 linuxcnc devel logs https://forum.linuxcnc.org/18-computer/39370-script-for-automated-testing-of-computer-latency?start=40 Script for automated testing of computer latency. - Page 5 - LinuxCNC Jun 20, 2020 - Attached is a script that can be used to test latency on PC's and laptops intended for use with LinuxCNC The script is made by user "seuchato", all credits... automated testing latency page script computer linuxcnc https://psha.org.ru/irc/%23emc-devel/2012-10-29.html #linuxcnc-devel | Logs for 2012-10-29 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2012-10-18.html #linuxcnc-devel | Logs for 2012-10-18 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2014-06-09.html #linuxcnc-devel | Logs for 2014-06-09 linuxcnc devel logs https://www.forum.linuxcnc.org/12-milling/39963-replacing-advanced-motion-controls-brush-type-12a8-with-axcent-amplifier?start=50 Replacing Advanced Motion Controls "brush type 12A8 with "Axcent" amplifier - Page 6 - LinuxCNC https://forum.linuxcnc.org/38-general-linuxcnc-questions/34150-internationalization-the-spanish-affair?start=0 Internationalization: The Spanish affair - LinuxCNC Mar 8, 2018 - 1343/5000 Hi to the whole team. This is my very first post. It will not be the last. First, but very important: I can understand English and read it without... internationalization spanish affair linuxcnc https://psha.org.ru/irc/%23emc-devel/2012-09-22.html #linuxcnc-devel | Logs for 2012-09-22 linuxcnc devel logs https://forum.linuxcnc.org/qtpyvcp/37993-qtpyvcp-gcodeeditor-widget-styling-please-review-and-comment?start=40 QtPyVCP - GCodeEditor - Widget Styling - Please review and comment. - Page 5 - LinuxCNC Dec 15, 2019 - I have been working to get the QScintilla editor styled so it is a bit easier to read than the base model. I have attached a few photos of what it looks like... review and comment qtpyvcp widget styling please https://www.forum.linuxcnc.org/24-hal-components?start=1340 HAL - Page 56 - LinuxCNC hal linuxcnc https://psha.org.ru/irc/%23emc-devel/2012-12-29.html #linuxcnc-devel | Logs for 2012-12-29 linuxcnc devel logs https://www.forum.linuxcnc.org/12-milling/39963-replacing-advanced-motion-controls-brush-type-12a8-with-axcent-amplifier?start=70 Replacing Advanced Motion Controls "brush type 12A8 with "Axcent" amplifier - Page 8 - LinuxCNC https://forum.linuxcnc.org/38-general-linuxcnc-questions/54362-suggestion-for-a-pci-epp-card-for-7i43?start=0 Suggestion for a PCI EPP card for 7i43 - LinuxCNC Nov 6, 2024 - Hi. I do have a 7i43 laying around and want to use it with a thinkcenter p90 (good latency) without a parallel port. So is there a good choice for a current... for a suggestion pci epp card https://forum.linuxcnc.org/show-your-stuff/39255-grandma-s-sewing-goes-linuxcnc-embroid?start=0 Grandma's Sewing goes Linuxcnc Embroid - LinuxCNC Jun 6, 2020 - Hi Corona Basement Cleanup ;-) lots of CNC Stuff around AND a VERY OLD nonfunctional PFAFF sewing Machine so i always need Batches to sew on Names or Logo... grandma sewing goes linuxcnc https://www.forum.linuxcnc.org/40-subroutines-and-ngcgui/36980-pathpilot-subroutine-prompt-user-for-input Pathpilot Subroutine - Prompt user for input? - LinuxCNC Jul 15, 2019 - Is it possible to have a subroutine ask for user input? I would like to create a looping subroutine for boring hole that ends when the hole is on size. The... pathpilot subroutine prompt user input https://www.forum.linuxcnc.org/9-installing-linuxcnc/39779-rpi4-raspbian-64-bit-linuxcnc?start=130 RPI4 Raspbian 64 bit & LinuxCNC - Page 14 - LinuxCNC Aug 15, 2020 - Edit 18/3/2021: NOTE: This post describes how to install a 64-bit kernel and build LinuxCNC to suit on the Pi. If you need a 64-bit kernel then these are the... raspbian bit linuxcnc https://www.forum.linuxcnc.org/subroutine-library/34154-o-codes-and-grbl o codes and grbl - LinuxCNC Mar 9, 2018 - I've got a Sienci Mill One which runs grbl on an Arduino Uno. I know grbl only supports a sub-set of g-codes and am wondering if LinuxCNC would do any... codes grbl linuxcnc https://www.forum.linuxcnc.org/ethercat/54949-exercise-turn-on-output-led-on-el2809-when-machine-is-turned-on Exercise: Turn on output led on EL2809 when machine is turned on - LinuxCNC Jan 6, 2025 - I have spent a lot of time reading the manual but unfortunately I could not put togheter all the pieces to come up with a solution, I'm pretty new to LCNC and... turn on exercise output led https://psha.org.ru/irc/%23emc-devel/2012-11-09.html #linuxcnc-devel | Logs for 2012-11-09 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2013-03-13.html #linuxcnc-devel | Logs for 2013-03-13 linuxcnc devel logs https://forum.linuxcnc.org/16-stepconf-wizard/28553-configuring-tb6600 Configuring TB6600 - LinuxCNC Nov 13, 2014 - I have a Jk02-M breakout board and the HY-DIV268N driver. I have a Toshiba - TB6600HG. I am looking at this Stepper Configuration Wizard and I wonder if... configuring linuxcnc https://www.forum.linuxcnc.org/27-driver-boards/37141-mesa-card-basics?start=20 Mesa Card Basics - Page 3 - LinuxCNC Aug 9, 2019 - Mesa cards are add-on cards that offload the high-speed tasks to an FPGA. The FPGA runs a firmware known as "" The interface between LinuxCNC and the card is... mesa card basics linuxcnc https://forum.linuxcnc.org/27-driver-boards/45480-need-help-to-wire-and-config-mesa-7i92tm?start=60 Need help to wire and config Mesa 7i92TM - Page 7 - LinuxCNC Mar 30, 2022 - Hi guys, I'm new here. I have a cheap CNC router from China with a USB BOB BL-USBMach-v2.1, TSS-TB6560-V1.0 driver, and SHOVIT STEPPER MOTOR... need help wire https://forum.linuxcnc.org/38-general-linuxcnc-questions/39323-new-project-with-mesa-7i96-and-thcad-05?start=110 New Project with Mesa 7I96 and THCAD-05 - Page 12 - LinuxCNC Jun 13, 2020 - Installed linuxcnc 2.7.14 and then upgraded to 2.8 since I have been seeing that mesa 7I96 works with this version. I filled out the pnconfig wizard and I... new project mesa https://psha.org.ru/irc/%23emc-devel/2014-03-30.html #linuxcnc-devel | Logs for 2014-03-30 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2013-06-22.html #linuxcnc-devel | Logs for 2013-06-22 linuxcnc devel logs https://forum.linuxcnc.org/38-general-linuxcnc-questions/50268-trajectory-planner-using-ruckig-lib?start=220 Trajectory Planner using Ruckig Lib - Page 23 - LinuxCNC Oct 5, 2023 - Source and Documentation Repository: Documentation: Once these three components are ready, we will combine these into a new repository with some... trajectory planner using lib linuxcnc https://www.probotix.com/wiki/index.php?title=LinuxCNC_2.5_on_Ubuntu_10.04&action=info Information for "LinuxCNC 2.5 on Ubuntu 10.04" - PROBOTIX :: wiki information for linuxcnc https://forum.linuxcnc.org/21-axis/32966-spindle-index?start=20 Spindle index - Page 3 - LinuxCNC Jun 29, 2017 - Hi. My CNC lathe is finally completely finished. I have used it to machine some pistons and it works great. Thanks to everyone here for their help. One final... index page spindle linuxcnc https://forum.linuxcnc.org/29-forum-announcements/48842-new-realtime-modbus-driver-for-mesa-cards New realtime-modbus driver for Mesa cards - LinuxCNC Apr 19, 2023 - I have just pushed a feature branch (andypugh/mesa_modbus) to the LinuxCNC github. It uses the Mesa FPGA UARTs (specifically pktUART) to offer real-time... new realtime modbus driver mesa https://www.forum.linuxcnc.org/show-your-stuff/48630-arduino-io-expansion?start=70 Arduino IO Expansion - Page 8 - LinuxCNC Mar 29, 2023 - Hi, I want to share a little side Project i've been working on. For my CNC Lathe Retrofit Project i was left with a couple of old Buttons, Knobs and Lights... arduino io linuxcnc https://forum.linuxcnc.org/ethercat/45336-ethercat-installation-from-repositories-how-to-step-by-step?start=400 Ethercat installation from repositories - how to step by step - Page 41 - LinuxCNC Mar 13, 2022 - UPDATE: Following the release Of linuxCNC 2.9.2 install linuxcnc from the downloads page linuxcnc.org/downloads/ After installation, refer to the... how to by page ethercat installation repositories https://forum.linuxcnc.org/22-pyvcp/31121-pyvcp-in-center-display-possible pyVCP in center display... possible? - LinuxCNC Jun 18, 2016 - I have made some pretty neat panels for several machines... always on the far right side of AXIS. I know you can create a TAB next to the DRO on the main... center display possible linuxcnc https://psha.org.ru/irc/%23emc-devel/2013-08-16.html #linuxcnc-devel | Logs for 2013-08-16 linuxcnc devel logs https://forum.linuxcnc.org/qtvcp/38247-sample-qtvcp-screens?start=190 Sample Qtvcp Screens - Page 20 - LinuxCNC Jan 22, 2020 - A place for sample screens using Qtvcp - The Screen/Vcp building infrastructure included with linuxcnc 2.8 + These are included with Linuxcnc: QtDragon... sample screens linuxcnc https://psha.org.ru/irc/%23emc-devel/2013-11-14.html #linuxcnc-devel | Logs for 2013-11-14 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2013-04-09.html #linuxcnc-devel | Logs for 2013-04-09 linuxcnc devel logs https://www.forum.linuxcnc.org/30-cnc-machines/32276-brother-tc-225-tc-229-adventure?start=130 Brother TC-225 / TC-229 adventure! - Page 14 - LinuxCNC Jan 31, 2017 - so, i got me a pair of brother tapping centres. they get here in a few days. i ordered up a mesa 7i77 card for the TC-225 and that should arrive monday. So,... brother tc adventure linuxcnc https://www.tridimake.com/2017/05/replacing-linuxcnc-with-smoothie-milling.html 3D printer improvements: Replacing LinuxCNC with a Smoothieboard for CNC milling. Not as easy as... An independent blog about 3D printing, 3D printers and FDM technologies. Sometimes very readable, sometimes very technical. https://psha.org.ru/irc/%23emc-devel/2012-05-23.html #linuxcnc-devel | Logs for 2012-05-23 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2013-11-09.html #linuxcnc-devel | Logs for 2013-11-09 linuxcnc devel logs https://forum.linuxcnc.org/21-axis/31353-how-to-modify-the-color-of-background-of-axis how to modify the color of background of AXIS - LinuxCNC Aug 4, 2016 - Hello everyone. Now I want to make some changes on AXIS gui. I have changed something by modify the axis.tcl and axis.py files. But I can not change the... how to modify color background axis https://www.forum.linuxcnc.org/pathpilot/30159-pathpilot-controlled-lathe-toolchanger?start=40 PathPilot controlled lathe toolchanger - Page 5 - LinuxCNC Jan 4, 2016 - Hello I have developed an 8 position toolchanger for my lathe I am using a 5i25 and 7i76. The bit files that come with the 5i25 are set up to produce 5 step... pathpilot controlled lathe linuxcnc https://emergent.unpythonic.net/01474128483 LinuxCNC on BeagleBone Black, Raspberry Pi, Odroid U3, Odroid XU4 beaglebone black raspberry pi linuxcnc odroid https://psha.org.ru/irc/%23emc-devel/2013-10-25.html #linuxcnc-devel | Logs for 2013-10-25 linuxcnc devel logs https://forum.linuxcnc.org/18-computer/48079-can-the-opi5-be-configured-to-run-lcnc?start=410 Can the OPI5 be Configured to Run LCNC? - Page 42 - LinuxCNC Jan 27, 2023 - This is a fork of the thread "Potential All-in-One Single Board Computers". ... configured https://psha.org.ru/irc/%23emc-devel/2014-01-26.html #linuxcnc-devel | Logs for 2014-01-26 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2012-07-28.html #linuxcnc-devel | Logs for 2012-07-28 linuxcnc devel logs https://forum.linuxcnc.org/22-pyvcp/31878-tool-set-tool-table-automatic-offset-widget Tool-Set (Tool Table Automatic Offset Widget) - LinuxCNC Nov 22, 2016 - One of my YouTube viewers asked if I could make an automatic way to set the tool offsets in the table. I worked on it this evening, and I think I have a good... tool set table automatic offset widget https://psha.org.ru/irc/%23emc-devel/2012-12-08.html #linuxcnc-devel | Logs for 2012-12-08 linuxcnc devel logs https://forum.linuxcnc.org/9-installing-linuxcnc/39779-rpi4-raspbian-64-bit-linuxcnc?start=170 RPI4 Raspbian 64 bit & LinuxCNC - Page 18 - LinuxCNC Aug 15, 2020 - Edit 18/3/2021: NOTE: This post describes how to install a 64-bit kernel and build LinuxCNC to suit on the Pi. If you need a 64-bit kernel then these are the... raspbian bit linuxcnc https://psha.org.ru/irc/%23emc-devel/2014-05-31.html #linuxcnc-devel | Logs for 2014-05-31 linuxcnc devel logs https://psha.org.ru/irc/%23emc-devel/2012-11-03.html #linuxcnc-devel | Logs for 2012-11-03 linuxcnc devel logs https://forum.linuxcnc.org/26-turning/57931-considering-a-full-rewire-on-a-working-schaublin-125-cnc?start=80 Considering a Full Rewire on a Working Schaublin 125 CNC - Page 9 - LinuxCNC Nov 26, 2025 - Hi,I recently got a Schaublin 125 CNC and I have a dilemma that I wanted to get some opinions on. The machine was previously retrofitted with Mach3, and it... https://forum.linuxcnc.org/show-your-stuff/39546-motoman-k6sb-retrofit?start=30 Motoman K6SB Retrofit - Page 4 - LinuxCNC Jul 14, 2020 - Hi Guys, What is life without multiple unfinished projects and here is another one, retrofitting my 1991 Yaskawa Motoman K6SB. This robot was used on the... motoman retrofit linuxcnc https://psha.org.ru/irc/%23emc-devel/2013-09-07.html #linuxcnc-devel | Logs for 2013-09-07 linuxcnc devel logs https://www.forum.linuxcnc.org/plasma-laser/40517-downdraft-design-questions?start=150 Downdraft design questions - Page 16 - LinuxCNC Nov 4, 2020 - Not sure if this is the right place, but I suspect someone here has experience with this. I am trying to find the best type and size fan to exhaust the... questions page downdraft design linuxcnc https://www.forum.linuxcnc.org/42-deutsch/52228-umstellung-auf-qtdragon-hd Umstellung auf QtDragon_hd - LinuxCNC Apr 2, 2024 - Hallo allemiteinander, ich bin gerade dabei, QtDragon_hd in Betrieb zu nehmen. Ich richte mich nach dem deutschen Manual und habe dazu eine Frage: Zur... umstellung auf hd linuxcnc https://forum.linuxcnc.org/9-installing-linuxcnc/57505-proposal-rpi-linuxcnc-image-based-on-raspi-os-all-welcome-encoraged-to-comment Proposal RPi Linuxcnc Image Based on Raspi OS All welcome/encoraged to comment - LinuxCNC Oct 18, 2025 - After a bit of a discussion with forum member f355 it came to my attention that an image based on the "Raspiberry Pi Way" maybe possible. Whilst a little... https://forum.linuxcnc.org/12-milling/33035-retrofitting-a-1986-maho-mh400e?start=1290 Retrofitting a 1986 Maho MH400E - Page 130 - LinuxCNC Jul 17, 2017 - EDIT: Here is a summary of this project... Hi All, I'm an aircraft maintenance engineer living in Vienna. I purchased a 1986 MAHO MH400E which came out of a... retrofitting maho linuxcnc https://psha.org.ru/irc/%23emc-devel/2012-06-20.html #linuxcnc-devel | Logs for 2012-06-20 linuxcnc devel logs https://forum.linuxcnc.org/9-installing-linuxcnc/52756-linuxcnc-will-not-connect-to-mesa-7i76e-ip-address Linuxcnc will not connect to MESA 7i76e IP Address - LinuxCNC May 25, 2024 - Hey everyone! This is my first post and first time installing and configuring Linuxcnc with a Plasma Table that has four Clearpath servo motors and a MESA... connect to linuxcnc mesa ip address https://forum.linuxcnc.org/gmoccapy?start=600 Gmoccapy - Page 31 - LinuxCNC User Interfaces - Gmoccapy - Page 31 - LinuxCNC... linuxcnc https://www.forum.linuxcnc.org/plasmac/38922-for-phillc-regarding-plasmac-and-z-axis-stuff?start=10 For PhillC regarding PlasmaC and Z axis stuff - Page 2 - LinuxCNC Apr 24, 2020 - This is for discussing some issues with the way PlasmaC uses the Z axis setup. First, thank you for some magnificent work on it, and all the others that... regarding plasmac https://www.forum.linuxcnc.org/10-advanced-configuration/29778-spindle-index-enable?start=0 spindle-index-enable - LinuxCNC Oct 16, 2015 - I have a lathe with a servo motor at the spindle. It run in velocity mode. I have via EtherCat direct access to the position and velocity registers in the... spindle index enable linuxcnc https://forum.linuxcnc.org/31-cad-cam?start=120 CAD CAM - Page 7 - LinuxCNC A place to discuss CAD and CAM topics... - Page 7 cad cam linuxcnc https://forum.linuxcnc.org/nativecam/31659-nativecam-is-features-renamed?start=50 NativeCAM is Features renamed - Page 6 - LinuxCNC Oct 5, 2016 - Hi Following many people advices and after discussion with Nick, it was decided to rename Features to NativeCAM for LinuxCNC. A new version 2.5 will be... features renamed linuxcnc https://www.forum.linuxcnc.org/plasma-laser/40517-downdraft-design-questions?start=190 Downdraft design questions - Page 20 - LinuxCNC Nov 4, 2020 - Not sure if this is the right place, but I suspect someone here has experience with this. I am trying to find the best type and size fan to exhaust the... questions page downdraft design linuxcnc https://forum.linuxcnc.org/nativecam/31659-nativecam-is-features-renamed NativeCAM is Features renamed - LinuxCNC Oct 5, 2016 - Hi Following many people advices and after discussion with Nick, it was decided to rename Features to NativeCAM for LinuxCNC. A new version 2.5 will be... features renamed linuxcnc https://forum.linuxcnc.org/26-turning/41498-schaublin-125-cnc-retrofit?start=250 Schaublin 125-CNC retrofit. - Page 26 - LinuxCNC Feb 21, 2021 - Hi All,I bought a Schaublin 125-CNC with pretty good bones which will need the LinuxCNC modernisation. schaublin cnc retrofit https://psha.org.ru/irc/%23emc-devel/2013-04-03.html #linuxcnc-devel | Logs for 2013-04-03 linuxcnc devel logs https://www.forum.linuxcnc.org/plasmac/39307-z-axis-height-at-end-of-cut Z axis height at end of cut - LinuxCNC Jun 11, 2020 - Phill, could the Z axis be retracted to the maximum height at the end of a gcode file? At the moment I think it goes to probe height. This causes havoc on a... z axis height end cut https://www.probotix.com/wiki/index.php?title=LinuxCNC_2.5_on_Ubuntu_10.04&oldid=14589 LinuxCNC 2.5 on Ubuntu 10.04 - PROBOTIX :: wiki linuxcnc ubuntu wiki https://forum.linuxcnc.org/18-computer/48079-can-the-opi5-be-configured-to-run-lcnc?start=120 Can the OPI5 be Configured to Run LCNC? - Page 13 - LinuxCNC Jan 27, 2023 - This is a fork of the thread "Potential All-in-One Single Board Computers". ... configured https://forum.linuxcnc.org/qtpyvcp/57434-probe-basic-probing-location Probe Basic Probing Location - LinuxCNC Oct 10, 2025 - Hi I Have Problem With Probe Basic Probing So My CNC is: X+ Left To Right( 0 - 330) Y+ From Front To Back ( 0 - 200) However When I Want To Probe Front Left... probe basic probing location linuxcnc https://forum.linuxcnc.org/51-ot-posts/52582-a-blast-from-the-past-for-pcw?start=0 A blast from the past for PCW - LinuxCNC May 6, 2024 - I was cleaning out a bin full of old electronics stuff the other day and this little board with a Mesa logo caught my eye. Probably circa 2001, I bought this... a blast from the past pcw linuxcnc https://www.forum.linuxcnc.org/39-pncconf/31215-sable-2015-g540-configuration-with-5i25 Sable-2015(G540) configuration with 5i25 - LinuxCNC Jul 6, 2016 - I am trying to get my setup to turn some plastic. I am new to Linux and CNCs in general but trying to move forward. I have had some direction from Peter at... sable configuration linuxcnc https://forum.linuxcnc.org/nativecam/36947-unbuntu-lucid-nativecam-install?start=0 unbuntu lucid nativecam install - LinuxCNC Jul 10, 2019 - OK, I am not good at computers. That said I need help. I have been reading all I can about installing NativeCam. I see others saying they got it going but... lucid install linuxcnc https://forum.linuxcnc.org/22-pyvcp/30252-display-max-min-xyz-via-custom-xml Display Max/Min XYZ via custom.xml - LinuxCNC Jan 20, 2016 - Hi All Is there a way/variable that i can use to display the Max/Min of XYZ from a loaded Gcode file?? Thanks Doug :) display max min xyz via https://forum.linuxcnc.org/9-installing-linuxcnc/51598-2-91-to-2-92-upgrade-solved?start=0 2.91 to 2.92 upgrade - Solved - LinuxCNC Feb 5, 2024 - I have LinuxCNC 2.91 installed, v2.91 does not include the newer version of mesact that supports the 7i95t. I went down a rabbit hole trying to get the... upgrade solved linuxcnc https://forum.linuxcnc.org/plasmac/37777-error-after-plasmac-upgrade Error after PlasmaC Upgrade - LinuxCNC Nov 9, 2019 - Hi, This is my first time upgrading a working PlasmaC config. I receive the attached error when I start LinuxCNC. Then when I ok it, LinuxCNC opens (axis)... error plasmac upgrade linuxcnc https://psha.org.ru/irc/%23emc-devel/2012-02-03.html #linuxcnc-devel | Logs for 2012-02-03 linuxcnc devel logs https://manpages.ubuntu.com/manpages/questing/man9/hm2_spix.9.html Ubuntu Manpage: hm2_spix - LinuxCNC HAL driver for the Mesa Electronics Anything IO boards with SPI... LinuxCNC HAL driver for the Mesa Electronics Anything IO boards with SPI enabled HostMot2 firmware.