https://www.ietf.org/archive/id/draft-ietf-v6ops-rfc6146-bis-01.html
Stateful NAT64: Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers
This document describes stateful NAT64 translation, which allows IPv6-only clients to contact IPv4 servers using unicast UDP, TCP, or ICMP. One or more public...
https://www.juniper.net/documentation/us/en/software/junos/flow-monitoring/topics/example/configuring-j-flow-logging.html
Configure Active Flow Monitoring Logs for NAT44/NAT64 | Junos OS | Juniper Networks
Active Flow Monitoring logs are generated for NAT44 /NAT64 sessions to create or delete events on MX-SPC3 devices.
flow monitoring
https://www.juniper.net/documentation/us/en/software/nce/nce-nat64-ipv6-ipv4-depletion/topics/example/ipv6-nat64-ipv4-depletion-configuration.html
Example: Configuring Stateful NAT64 for Handling IPv4 Address Depletion | Juniper Networks
This example configures stateful NAT64 on an MX Series 3D Universal Edge router with a Services DPC. The configuration replicates the example flow found in...
ipv4 address depletionexampleconfiguringstatefulnat64
https://www.rfc-editor.org/rfc/rfc7225
RFC 7225: Discovering NAT64 IPv6 Prefixes Using the Port Control Protocol (PCP)
port control protocol
https://nat64.net/
Public NAT64 service
publicnat64service
https://stats.uptimerobot.com/GQ5RyTJLKZ
NAT64 public servers status
nat64publicserversstatus
https://en.wikipedia.org/wiki/NAT64
NAT64 - Wikipedia
nat64wikipedia